Search results for: 's av over ip category 1'
HDMI 2.0 Full 4K Fiber Optical Extender with Gigabit Ethernet
The HDMI20-OPTC-TX/RX220-PCNis a HDMI 2.0 compatible extender pair for video, RS-232 and Gigabit Ethernet signals, supporting uncompressed 4K UHD resolution at 60Hz 4:4:4. Video and Ethernet signals are transferred over a single optical line.
AV Over IP Scaling Multimedia Extender with USB K+M, PoE and DANTE/AES67 support
VINX-120AP-HDMI-ENC-DNT is a LAN based encoder multimedia device to extend HDMI video from a local source to a remote sink. The VINX encoder and decoder devices connect either via a direct CATx cable connection or through a Gigabit Ethernet switch in-between.
Modular 24x24 4K Hybrid Matrix Switcher
MX2M-FR24R-RF is a member of the Lightware MX2 modular matrix switcher series, supporting uncompromised 4K UHD resolution at 60Hz with RGB 4:4:4 colorspace. Equipped with two PSUs to provide redundant power supply for the frame itself.
Single Fiber HDMI 1.3 Optical Extenders with Bi-directional RS-232
HDMI-OPT-series are optcal extenders transfering HDMI 1.3 with embedded audio, DVI 1.0, HDCP and bi-directional RS-232 signals over one multimode fiber to a range of up to 2500 meters.
16m long USB 3.1 Gen1 SuperSpeed Active Extension Cable TypeA/male to TypeA/female
Multimode Single Fiber Extender with Bi-directional RS-232
SW4-OPT-TX240RAK extends HDMI 1.4, DVI 1.0, HDCP and bidirectional RS-232 signals over one multimode fiber and transmit video signal with embedded audio to a distance of up to 2500 meters.
HDMI 2.0 Multimode Fiber Input Board
Floorplate AV Over IP Scaling Multimedia Extender with USB K+M and PoE support
FP-VINX-110P-HDMI-ENC is a two-gang form factor LAN based encoder multimedia device to extend HDMI video from a local source to a remote sink. The VINX encoder and decoder devices connect either via a direct CATx cable connection or through a Gigabit Ethernet switch in-between.
Powered Rackmount Cage for 16 extenders
Rack mountable power supply for Lightware interfaces
Power supply is the heart of all electrical devices, the core of any secure and reliable system.
Multimode Single Fiber Extender
HDMI-3D-OPT-TX210 extends HDMI 1.4, DVI 1.0, HDCP and bi-directional RS-232 signals over one multimode fiber and transmits video signal with embedded audio to a distance of up to 2500 meters.
AVX (non-switchable) HDMI 2.0 extender
TPS (HDBaseT) extender for HDMI with local monitor out
The HDMI-TPS-TX220 is a flagship model in the Lightware TPS (HDBase-TTM Transmitter) product family. The device can transmit universal video, audio and control up to a 170 meter distance over a single CAT. The extender was designed to handle HDMI 1.4 digital video signals and analog stereo audio from local inputs or HDMI Embedded Audio up to 8 Channel PCM or HBR audio. It also handles HDCP encryption. Advanced EDID Management forces the required resolution from any video source and fixes the output format conforming the system requirements. Remote powering is available through the single CAT 5e - CAT 7 cable, but local power supply can also be used. All devices can be mounted on a rack shelf or used standalone. HDMI-TPS-TX220 is compatible with both HDBaseT extenders and matrix switchers.
Multimode Single Fiber Extender pair
HDMI-3D-OPT-TX210DD and HDMI-3D-OPT-RX110DD extends HDMI 1.4, DVI 1.0 over one multimode fiber and transmits video signal with embedded audio to a distance of up to 2500 meters.
SDVoE compatible HDMI 2.0 transmitter
Universal Matrix Switcher with HDMI 2.0 connectivity and USB 3.1 Gen1 features
Lightware’s universal matrix switcher allowing users to switch between hosts and BYOD devices using a combination of HDMI 2.0 and USB 3.1 Gen1 connections, with video and audio signals up to 4k@60Hz 4:4:4 and data speeds up to 5 Gbps.
MX HDMI Optical Output Board with Reclocking
MX‑HDMI‑3D‑OB‑R is an eight channel Multimode optical output board, providing HDMI 1.4, audio and RS‑232 extension over a single Multimode fiber up to a range of 2500m.
Full 4K HDMI 2.0 Compatible Fiber Optical Extender
The HDMI20-OPTJ-TX90 and HDMI20-OPTJ-RX90 are HDMI 2.0 compatible optical fiber extenders.These units transfer uncompressed HDMI 2.0 class 4K signals with embedded audio to up to 600m or a FullHD signal up to 2500m distance over one MultiMode fiber cable.
AV Over IP Scaling Multimedia Extender with USB K+M, RS-232 and IR
Our AV-Over-IP system for Gigabit Ethernet networks, the VINX series devices are popular products, which can also run in point-to-point configuration and have diverse application possibilities, especially recommended for applications where scalability, flexibility and rapid deployment are in focus. They are simple to install and to operate, and have numerous built-in services most other manufacturers only provide for an extra cost. The open API of the VINX devices allow easy integration with third party systems.
HDMI 2.0 Full 4K Fiber Optical Extender with Gigabit Ethernet
The HDMI20-OPTC-TX/RX220-PCN is a HDMI 2.0 compatible extender pair for video, RS-232 and Gigabit Ethernet signals, supporting uncompressed 4K UHD resolution at 60Hz 4:4:4.
HDMI 2.0 Multimode Fiber Output Board
TPS (HDBaseT™) extender for DVI with local monitor out
The DVI-HDCP-TPS-TX220 is a flagship model in the Lightware TPS (HDBaseT™ Transmitter) product family. The device can transmit universal video, audio and control up to a 170 meter distance over a single CAT cable. The extender was designed to handle DVI, HDMI 1.4 digital video signals and analog stereo audio from local inputs or HDMI Embedded Audio up to eight channel PCM or HBR audio.