Search results for: 's software'
9x9 Crosspoint MX Modular Digital Router Frame
The MX series matrix routers are the highest performance, modular expandable DVI and HDMI compliant switchers, available in five different frame sizes. The built‑in sophisticated software and hardware features make these routers the most flexible integrated solution for AV professionals, and high‑end home theatre applications
HDCP Compliant Pro Series 8x8 HDMI Matrix
MX8x8HDMI‑Pro supports DVI 1.0, HDCP 1.2 and HDMI 1.3 deep color standards. This high performance router has eight HDMI inputs and eight HDMI outputs.
HDMI Distribution Amplifier with HDCP
DA2HDMI‑4K‑Plus is a multifunctional distribution amplifier with built‑in EDID Management and Pixel Accurate Reclocking, supporting DVI and HDMI 1.4 signals with or without HDCP encryption. The output signal is reclocked and stabilized using Lightware Pixel Accurate Reclocking technology to remove jitter
caused by long cables or poor quality sources.
HDMI and TPS Matrix Switcher with Special Audio Inputs and Multiport Control Options
MMX8x4-HT420M is a standalone matrix switcher specifically designed for conference room environments. It has eight video inputs (four HDMI and four TPS) and four video outputs (two HDMI outputs and two TPS outputs). 4K / UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0), 3D capabilities and HDCP are fully supported.
AV Over IP Scaling Multimedia Extender with USB K+M, PoE and DANTE/AES67 support
VINX-120AP-HDMI-ENC-DNT is a LAN based encoder multimedia device to extend HDMI video from a local source to a remote sink. The VINX encoder and decoder devices connect either via a direct CATx cable connection or through a Gigabit Ethernet switch in-between.
Bring Out the Most of Your Meeting Room with the MiniWeb Room Control Configurator
Floorplate AV Over IP Scaling Multimedia Extender with USB K+M and PoE support
FP-VINX-110P-HDMI-ENC is a two-gang form factor LAN based encoder multimedia device to extend HDMI video from a local source to a remote sink. The VINX encoder and decoder devices connect either via a direct CATx cable connection or through a Gigabit Ethernet switch in-between.
Remote control panel for Lightware matrix switchers
Lightware MX‑RCP32 is remote control panel for controlling Lightware matrix routers remotely through LAN connection. The RCPs can be used just like the front panel buttons on matrix routers to make crosspoint changes, or they can be programmed for special functions like salvo mode or universal device control.
Optical AV Over IP Video System for 10G Networks
UBEX is an optical scaling extender which allows 4K UHD@60Hz 4:4:4 uncompressed signal extension with latency-free multistreaming. The device is designed to use Video Over IP transmission on a 10G Ethernet network.
AV Over IP Scaling Multimedia Encoder with USB K+M, RS-232 and IR
Our AV-Over-IP system for Gigabit Ethernet networks, the VINX series devices are popular products, which can also run in point-to-point configuration and have diverse application possibilities, especially recommended for applications where scalability, flexibility and rapid deployment are in focus. They are simple to install and to operate, and have numerous built-in services most other manufacturers only provide for an extra cost. The open API of the VINX devices allow easy integration with third party systems.
DisplayPort 1.2 Input Board
DisplayPort 1.2 Input Board
MX-CPU2 Processor Board for Modular Matrix Frames
MX‑CPU2 contains an additional input and output port that fully support DVI and 3D HDMI signals with or without HDCP encryption. The test input and preview output ports turn an existing 16x16 matrix to a 17x17, an existing 32x32 to a 33x33.
HDMI Audio De-embedder
HDMI-4K De-embedder is a multifunctional interface which is capable of audio de‑ embedding the PCM audio stream. Audio out is a 5‑pole Phoenix socket. The unit also features a 3.5 jack output for headphone monitoring.
Optical AV Over IP Video System for 10G Networks
UBEX is an optical scaling extender which allows 4K UHD@60Hz 4:4:4 uncompressed signal extension with latency-free multistreaming. The device is designed to use Video Over IP transmission on a 10G Ethernet network.
17x17 Digital Crosspoint Router Frame
The MX series matrix routers are the highest performance, modular expandable DVI and HDMI compliant switchers, available in five different frame sizes. The built‑in sophisticated software and hardware features make these routers the most flexible integrated solution for AV professionals, and high‑end home theatre applications
HDMI 2.0 Matrix Switcher with breakout Audio, Occupancy Sensor input and various control features
Lightware’s HDMI2.0 matrix switcher allows users to switch between in-room computers and BYOD devices with video and audio signals up to 4k@60Hz 4:4:4.
Floorplate AV Over IP Scaling Multimedia Extender with USB K+M and PoE support
FP-VINX-110P-HDMI-ENC is a two-gang form factor LAN based encoder multimedia device to extend HDMI video from a local source to a remote sink. The VINX encoder and decoder devices connect either via a direct CATx cable connection or through a Gigabit Ethernet switch in-between.
UMX Series TPS (HDBaseTTM) Wallplate for VGA and HDMI
WP‑UMX‑TPS‑TX120‑US Black / White transmits universal 4K video, audio and control up to a range of 170 m over a single CAT cable. This transmitter was designed for digital and analog video and audio signals: VGA, YPrPb and HDMI 1.4 with analog stereo audio from local input or embedded 7.1 HBR audio.
4K HDMI Input Board with Analog Audio Add-on
25G-8HDMI2-A3-IB provides fully transparent HDMI 1.4 connectivity to the latest high-end digital sources including 3D functions between the endpoints.
80x80 Crosspoint MX Modular Digital Router Frame
The MX series matrix routers are the highest performance, modular expandable DVI and HDMI compliant switchers, available in five different frame sizes. The built‑in sophisticated software and hardware features make these routers the most flexible integrated solution for AV professionals, and high‑end home theatre applications
AV Over IP Scaling Multimedia Extender with USB K+M, RS-232 and IR
Our AV-Over-IP system for Gigabit Ethernet networks, the VINX series devices are popular products, which can also run in point-to-point configuration and have diverse application possibilities, especially recommended for applications where scalability, flexibility and rapid deployment are in focus. They are simple to install and to operate, and have numerous built-in services most other manufacturers only provide for an extra cost. The open API of the VINX devices allow easy integration with third party systems.