Search results for: 'Support Lightware'
AVX (non-switchable) HDMI 2.0 extender
Multiport HDMI and TPS Matrix Switcher
TPS Extender for Single CATx Cable with HDCP 2.2
DVI‑HDCP‑TPS‑TX95 twisted pair HDBaseT™ extenders transfer uncompressed high resolution video signals over a single CATx cable.
2 m Premium High Speed HDMI 2.0b flexy cable
Small DVI Fiber Optical Extender
The DVI‑OPT‑RX110 is a DVI to fiber extender pair transmitting up to a range of 2500 m. The new, redesigned housing and ports of these units further enhances operation safety and security.
HDMI and TPS Matrix Switcher with Special Audio Inputs and Multiport Control Options
MMX8x8-HT440 is a standalone matrix switcher specifically designed for conference room environments. It has four HDMI and four TPS2 (HDBaseTTM) inputs with four HDMI outputs and four TPS2 outputs. 4K / UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0), 3D capabilities and HDCP are fully supported.
Universal Three-Input TPS (HDBaseTTM) Transmitter with Event Manager Room Control
HDMI Distribution Amplifier with HDCP
DA2HDMI‑4K‑Plus is a multifunctional distribution amplifier with built‑in EDID Management and Pixel Accurate Reclocking, supporting DVI and HDMI 1.4 signals with or without HDCP encryption. The output signal is reclocked and stabilized using Lightware Pixel Accurate Reclocking technology to remove jitter
caused by long cables or poor quality sources.
Floorplate AV Over IP Scaling Multimedia Extender with USB K+M and PoE support
FP-VINX-110P-HDMI-ENC is a two-gang form factor LAN based encoder multimedia device to extend HDMI video from a local source to a remote sink. The VINX encoder and decoder devices connect either via a direct CATx cable connection or through a Gigabit Ethernet switch in-between.
AV Over IP Scaling Multimedia Extender with USB K+M, RS-232 and IR
Our AV-Over-IP system for Gigabit Ethernet networks, the VINX series devices are popular products, which can also run in point-to-point configuration and have diverse application possibilities, especially recommended for applications where scalability, flexibility and rapid deployment are in focus. They are simple to install and to operate, and have numerous built-in services most other manufacturers only provide for an extra cost. The open API of the VINX devices allow easy integration with third party systems.
Universal Matrix Switcher with HDMI 2.0 connectivity and USB 3.1 Gen1 features
Lightware’s universal matrix switcher allowing users to switch between hosts and BYOD devices using a combination of HDMI 2.0 and USB 3.1 Gen1 connections, with video and audio signals up to 4k@60Hz 4:4:4 and data speeds up to 5 Gbps.
16x16 HDMI 2.0 matrix with Breakaway Analog Audio
The MX2-16x16-HDMI20-Audio is a member of the Lightware HDMI 2.0 standalone matrix switcher family that supports uncompromised 4K UHD resolution at 60Hz 4:4:4 and allows embedding audio to and deembedding audio from the HDMI stream.
Full 4K Matrix Switcher with DisplayPort Input and HDMI Output Ports
MX2-8x8-DH-8DPi-A is a member of the MX2 DH standalone matrix switcher series, supporting uncompromised 4K UHD resolution at 60Hz with RGB 4:4:4 colorspace and with down-conversion capabilities to 4:2:2. The DisplayPort inputs on the MX2 DH series routers allow connecting DisplayPort 1.2 video sources directly, without the need of adapters or dongles.
HDMI 2.0 Compatible 32x32 Standalone Matrix Router
MX2-32x32-HDMI20-A-R is a member of the MX2 standalone matrix switcher series supporting uncompromised 4K UHD resolution at 60Hz with RGB 4:4:4 colorspace and with down-conversion capabilities to 4:2:0
9x9 Crosspoint MX Modular Digital Router Frame
The MX series matrix routers are the highest performance, modular expandable DVI and HDMI compliant switchers, available in five different frame sizes. The built‑in sophisticated software and hardware features make these routers the most flexible integrated solution for AV professionals, and high‑end home theatre applications
4K HDBaseT™ Input Board with Analog Audio and PoE
Featuring eight HDBaseT™ input ports, this board is compatible with the full range of Lightware TPS extenders and HDBaseT™ compliant third party transmitters.
Fiber Optical DisplayPort Extender
Designed for use in both AV and IT applications, this DisplayPort extender pair provides extension up to 4K / UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) resolution on long 1100m distances.