25G-8TPS2-A3P1-OB
4K HDBaseT Output Board with Analog Audio and PoE
Featuring eight HDBaseT™ output ports, the board is compatible with the full range of Lightware TPS extenders and HDBaseT™ compliant 3rd party transmitters. The HDBaseT™ technology provides a transparent medium for all video, audio, data and control signals in line with the 25G multilayer architecture and allows for a cost effective extension solution for up to 170 meters.
Featuring eight HDBaseT™ 1.x output ports, the board is compatible with the full range of Lightware TPS extenders and HDBaseT™ compliant 3rd party transmitters. The HDBaseT™ technology provides a transparent medium for all video, audio, data and control signals in line with the 25G multilayer architecture and allows for a cost effective extension solution for up to 170 meters.
The A3 add on has bi directional configurable Phoenix connectors. The digitized audio from the add on can be embedded either to the output HDMI signal or to the Return Audio Layer. Moreover, IEC 60958 1 audio either from the HDMI signal or the Forward Audio Layer can be routed to the add on output.
The board provides remote powering for extenders according to the PoE specification (IEEE 802.3af-2003) but with increased output power of 25.4W. Remote powering does not require an external power source other than that of the 25G matrix switcher.
Supported Media Layers
- Video layer with embedded audio
- Forward Audio Layer
- Return Audio Layer
- Ethernet layer
- USB KVM layer
- Infra layer
- Consumer Electronics Control layer
- RS-232 & RS-422 control layer
- 1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
- Built-in PoE injector* for remote powering extenders
- Audio de-embedding
- Bidirectional balanced analog stereo audio ports with 5-pole Phoenix connector
- Optional digital or analog audio embedding and de-embedding add-ons
- Audio embedding and de-embedding
- Adjustable analog audio settings (volume, gain, balance)
- Optional digital or analog audio embedding and de-embedding add-ons
- Extension distance up to 170 meters (with CAT7 S/FTP AWG23 cable, 1920x1080p60)
- Frame Detector (analyze detailed video timings)
- 5-pole Phoenix balanced analog audio connectors
- Built-in PoE power injector* for remote powering extenders
- TPS link quality and cable length monitoring
- Bidirectional balanced analog stereo audio ports with 5-pole Phoenix connector
- HDBaseT compatible
- Ethernet extension (100 Mbps)
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Advanced EDID Management
- Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps)
- Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
- Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
- Pixel Accurate Reclocking
- Bi-directional RS-232 extension (pass-through)
- HDCP 1.4 compliant
- Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
- Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
- Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
- Built-in video test pattern generator
- No signal latency, zero frame delay
Specifications | |
HDCP compliancy: | 1.x |
HDBaseT™ compliance: | 1.x |
Max Resolution: | 4K / UHD (30Hz RGB or YCbCr 4:4:4, 60Hz YCbCr 4:2:0), 1080p@60Hz, 720p/1080i@120Hz |
Supported audio formats: | HDMI audio according to the Audio switching matrix section |
3D signal compatibility: | Frame packing, side-by-side, top-bottom |
Input cable equalization: | Up to 170 meters according to the maximum cable lengths section |
HDBaseT™ connectors: | 8 x RJ45 |
Audio connectors: | 8 x 5-pole Phoenix type |
PoE compliance: | IEEE 802.3af-2003 with output power of 25.5W |
Max cable lengths with the available firmware versions | ||||
Resolution | Pixel clock rate | Cable lengths (Auto / LR link mode) | ||
CAT5e AWG24 | CAT7 AWG26** | CAT7 AWG23 | ||
1024x768@60Hz | 65 MHz | 100 m / 130 m* | 90 m / 120 m* | 120 m / 170 m* |
1280x720p@60Hz | 73,8 MHz | 100 m / 130 m* | 90 m / 120 m* | 120 m / 170 m* |
1920x1080p@60Hz / 24bpp | 148,5 MHz | 100 m / 130 m* | 90 m / 120 m* | 120 m / 170 m* |
1920x1200@60Hz | 152,9 MHz | 100 m / NA | 90 m / NA | 120 m / NA |
1600x1200@60Hz | 162 MHz | 100 m / NA | 90 m / NA | 120 m / NA |
1920x1080@60Hz / 36bpp | 223 MHz | 70 m / NA | 70 m / NA | 100 m / NA |
3840x2160@30Hz UHD | 297 MHz | 70 m / NA | 70 m / NA | 100 m / NA |
4096x2160@30Hz 4K | 297 MHz | 70 m / NA | 70 m / NA | 100 m / NA |
*with long reach firmware option. Long reach firmware supports pixel clock frequencies up to 148,5 MHz. **Distances are 20% shorter if remote powering used. AWG 26 cables are not recommended with remote powering. |