Search results for: 'support lightware com'
Fiber Optical DisplayPort Extender
Designed for use in both AV and IT applications, this DisplayPort extender pair provides extension up to 4K / UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) resolution on long 1100m distances.
AVX (non-switchable) HDMI 2.0 extender
4x2 HDMI Matrix Switcher with Breakaway Analog Audio
MMX4x2-HDMI is a uniquely mini size matrix switcher. It has four HDMI inputs and two independent HDMI outputs.
16m long USB 3.1 Gen1 SuperSpeed Active Extension Cable TypeA/male to TypeA/female
Small DVI Fiber Optical Extender
The DVI‑OPT‑RX110 is a DVI to fiber extender pair transmitting up to a range of 2500 m. The new, redesigned housing and ports of these units further enhances operation safety and security.
AVX (non-switchable) HDMI 2.0 extender
Universal Three-Input TPS (HDBaseTTM) Transmitter with Event Manager Room Control
SDVoE compatible HDMI 2.0 receiver
HDMI Distribution Amplifier with Audio Embedder, De-Embedder and HDCP
DA2HDMI‑4K‑Plus‑A is a multifunctional distribution amplifier with audio embedding and de-embedding. Built‑in EDID Management and Pixel Accurate Reclocking, supporting DVI and HDMI 1.4 signals with or without HDCP encryption. The output signal is reclocked and stabilized using Lightware Pixel Accurate Reclocking technology to remove jitter caused by long cables or poor quality sources.
Video Switcher with HDMI 2.0 and USB-C connectivity
Lightware’s video switcher that exploits the USB-C connectivity for a simplified transmission of 4K video, audio, and power providing video resolution capabilities up to 4K@60Hz at 4:4:4.
HDMI and TPS Matrix Switcher with Special Audio Inputs and Multiport Control Options
MMX8x4-HT420M is a standalone matrix switcher specifically designed for conference room environments. It has eight video inputs (four HDMI and four TPS) and four video outputs (two HDMI outputs and two TPS outputs). 4K / UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0), 3D capabilities and HDCP are fully supported.
HDMI 2.0 Full 4K Fiber Optical Extender with Gigabit Ethernet
The HDMI20-OPTC-TX/RX220-Fox is a HDMI 2.0 compatible extender pair with a Fiberfox optical connector for video, RS-232 and Gigabit Ethernet signals, supporting uncompressed 4K UHD resolution at 60Hz 4:4:4.
Multimode Single Fiber Extender with Bi-directional RS-232
SW4-OPT-TX240RAK extends HDMI 1.4, DVI 1.0, HDCP and bidirectional RS-232 signals over one multimode fiber and transmit video signal with embedded audio to a distance of up to 2500 meters.
UMX Series Switcher for VGA, DVI-I, HDMI and DisplayPort with Audio embedding
UMX-HDMI-140-Plus ia a multiport VGA, DisplayPort, HDMI and DVI switch for universal 4K video and audio with an HDMI output. With the built-in Event Manager control feature it is the ultimate solution for huddle rooms and similar collaboration environments. This device was designed for digital and analog video and audio signals: VGA, YPrPb, DVI, HDMI 1.4 and DP 1.1 with analog stereo audio from local inputs or embedded 7.1 HDR audio.
Full 4K Matrix Switcher with Mixed DisplayPort and HDMI Input Ports
MX2-16x16-DH-8DPi-A-R is a member of the MX2 DH standalone matrix switcher series, supporting uncompromised 4K UHD resolution at 60Hz with RGB 4:4:4 colorspace and with down-conversion capabilities to 4:2:2. The DisplayPort inputs on the MX2 DH series routers allow connecting DisplayPort 1.2 video sources directly, without the need of adapters or dongles.
MX2 Series Full 4K Matrix Switcher with DisplayPort Input and Output Ports
AV Over IP Scaling Multimedia Extender with USB K+M, PoE and DANTE/AES67 support
VINX-120AP-HDMI-ENC-DNT is a LAN based encoder multimedia device to extend HDMI video from a local source to a remote sink. The VINX encoder and decoder devices connect either via a direct CATx cable connection or through a Gigabit Ethernet switch in-between.
Universal Matrix Switcher with HDMI 2.0 and USB-C connectivity
Lightware’s universal matrix switcher that exploits the USB-C connectivity for a simplified transmission of 4K video, audio, control signals and power providing meeting participants with easy host switching, utilizing data speeds of up to 5 Gbps under the USB 3.1 Gen1 providing video resolution capabilities up to 4K@60Hz at 4:4:4 as well as comprehensive and secure Ethernet features.
Modular 24x24 4K Hybrid Matrix Switcher
MX2M-FR24R-RFP is a member of the Lightware MX2 modular matrix switcher series, supporting uncompromised 4K UHD resolution at 60Hz with RGB 4:4:4 colorspace. Equipped with two PSUs to provide redundant power supply for the frame itself and also redundant remote powering via PoE.
HDMI 2.0 Switcher with breakout Audio, Occupancy Sensor input and various control features
Lightware’s HDMI2.0 switcher allows users to switch between in-room computers and BYOD devices with video and audio signals up to 4k@60Hz 4:4:4.
MX-CPU2 Processor Board for Modular Matrix Frames
MX‑CPU2 contains an additional input and output port that fully support DVI and 3D HDMI signals with or without HDCP encryption. The test input and preview output ports turn an existing 16x16 matrix to a 17x17, an existing 32x32 to a 33x33.
TPS Extender for Single CATx Cable with HDCP 2.2
DVI‑HDCP‑TPS‑TX95 twisted pair HDBaseT™ extenders transfer uncompressed high resolution video signals over a single CATx cable.
Full 4K Matrix Switcher with 8x8 DisplayPort 1.2 I/O Ports
MX2-8x8-DH-4DPio-A supports uncompromised 4K UHD resolution at 60Hz with RGB 4:4:4 colorspace and with down-conversion capabilities to 4:2:2. The DisplayPort connectors of the device allow connecting DisplayPort 1.2 video sources directly, without the need of adapters or dongles.