UMX4x4-Pro2
Professional Universal Matrix Switcher
UMX4x4-Pro2, the all-round Universal Matrix Switcher, is the perfect solution for dynamic environments such as small board rooms and classrooms. UMX (Universal MatriX) technology was recently developed by Lightware to support various analog and digital audio visual formats. VGA, YUV, digital DVI, HDMI 1.3 with HDCP, stereo analogue and S/PDIF digital audio signals are all supported.
UMX4x4-Pro2, the all-round Universal Matrix Switcher, is the perfect solution for dynamic environments such as small board rooms and classrooms. UMX (Universal MatriX) technology was recently developed by Lightware to support various analog and digital audio visual formats. VGA, YUV, digital DVI, HDMI 1.3 with HDCP, stereo analogue and S/PDIF digital audio signals are all supported.
Each input port incorporates an individual EDID Manager, a video A/D converter and a digital/analog video switch. No frame delay occurs if an analog signal is digitized. Each port contains an auto sync function, but the picture parameters can also be fine-tuned manually. The built in Frame Detector and graphical signal analyzer helps make precise adjustments and our Pixel Accurate Reclocking technology provides exceptional signal regeneration capability. UMX4x4-Pro2 has the ability to input HDMI with embedded audio and DVI with HDCP encryption, VGA, component video and analog or digital audio. De-embedding audio from the incoming HDMI stream, embedding at output from a different audio source and even routing audio separately from video is easily handled with the UMX switcher.
With the additional features, such as RS-232 and IP control and a comprehensive software suite, the UMX4x4-Pro2 is our most powerful and adaptive matrix yet.
Applications
- Small classrooms
- Conference rooms, collaborative telepresence
- Control room
- Multiroom video
- Home cinema
- Digitizes VGA, YUV analog input formats and converts to HDMI or DVI
- Audio de-embedding
- Audio embedding and de-embedding
- Audio embedding (or replace original audio)
- Adjustable analog audio settings (volume, gain, balance)
- Frame Detector (analyze detailed video timings)
- High power DVI 5V output (for fiber adapters, etc)
- Directly mountable in 19" rack
- Built-in universal power supply
- Supports several embedded audio formats (including PCM, Dolby Digital and DTS)
- DVI-I (Analog+Digital) input connection
- Input cable equalization up to 20m at 1080p60Hz (with 24 AWG high quality DVI/HDMI cable)
- 10 bit analog to digital conversion for interlaced and progressive video signals
- HDCP enable/disable function on input
- HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant
- Uncompressed video up to 6.75 Gbps datarate (225 MHz pixel clock)
- Device control via Ethernet (TCP/IP) and RS-232
- Advanced EDID Management (50 Factory presets, 50 user programmable slots)
- Advanced EDID Management
- Save and reload full crosspoint configurations as preset
- Front panel LCD menu and buttons for crosspoint control
- Intuitive control software for device configuration
- Fully non-blocking switching architecture
- Built-in website for device configuration
- Breakaway audio and video switching (audio and video signals can be routed separately)
- Pixel Accurate Reclocking
- No video compression
- Accepts VGA/YUV analog and DVI/HDMI 1.3 digital signals with embedded audio
- HDCP 1.4 compliant
- Firmware upgrade through Ethernet
- Built-in video test pattern generator
- No signal latency, zero frame delay
Analog audio | |
Gain: | 0 .. 24 dB for inputs |
Volume: | -78 .. 0 dB for outputs |
Supported audio formats | ||
Embedded audio | S/PDIF out | Unbalanced analog out |
Multichannel PCM (max 8 channel, up to 192 kHz) | Stereo PCM (up to 96 kHz) |
Stereo PCM (up to 96 kHz) |
Dolby Digital 2.1 | Dolby Digital 2.1 | x |
Dolby Digital 5.1 | Dolby Digital 5.1 | x |
Dolby Digital 7.1 | Dolby Digital 7.1 | x |
DTS 2.1 | DTS 2.1 | x |
DTS 5.1 | DTS 5.1 | x |
DTS 7.1 | DTS 7.1 | x |
Dolby TrueHD (HBR) | x | x |
DTS-HD (HBR) | x | x |
DTS-HD Master Audio (HBR) | x | x |
All other HDMI specified standards | x | x |
Specifications | |
Routing: | 4x4 video and 4x4 audio - any Input(s) to any Output(s) |
Resolution: | up to 2048x1080 or 1920x1200 or 1080p |
Input cable equalization: | 20 m digital DVI or HDMI only |
EDID memory: | 100 EDID |
Programmable EDID memory: | 50 EDID |
EDID support: | 256 byte Extended EDID |
HDCP compliant: | yes |
Front panel buttons: | yes |
Power: | 100 - 240 V AC |
Power consumption: | 15.2 W (typ), 25.3 W (max) |
Heat dissipation (BTU): | 52 (typ), 86 (max) |
Enclosure: | 1U rack mount metal |
Dimensions: | 446(482)W x 302D x 43,9H mm |
Weight: | 5 Kg |
Compliance: | CE |
Warranty: | 3 years |
Connectors | |
Video Input: | 4 x 29 pole DVI-I connector |
Video Output: | 4 x 29 pole DVI-D connector (digital only) |
Audio Input: | 4 x S/PDIF (Digital); 4 x L+R RCA (Analog Stereo) |
Audio Output: | 4 x S/PDIF (Digital); 4 x L+R RCA (Analog Stereo) |
Ethernet: | RJ45 |
RS-232 or 422: | 9-pole D-sub |
Power: | IEC 230V |