MMX8x4-HT400MC
HDMI and TPS Matrix Switcher with Special Audio Inputs
MMX8x4-HT400MC is a standalone matrix switcher specifically designed for conference room environments. It has eight video inputs (four HDMI and four TPS) and four HDMI video outputs. 4K / UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0), 3D capabilities and HDCP are fully supported.
Highlighted features
- Cisco VC room integration compatibility
- Advanced control feature pack for 3rd party video conference collaboration
- Audio embedding and de-embedding
- Built-in Event Manager control automation feature
- Built-in microphone pre-amplifier and sound mixer
MMX8x4-HT400MC is a standalone matrix switcher specifically designed for conference room environments. It has four HDMI and four TPS (HDBaseTTM) inputs and four HDMI video outputs. 4K / UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0), 3D capabilities and HDCP are fully supported. MMX8x4-HT400MC has a dedicated Special Audio Input block with input ports for microphone and line-in. The built-in sound mixer allows for free mixing of the microphone or the line-in and the deembedded audio from one of the input HDMI signals.
The Special Audio Input block includes a voice activation feature allowing the volume of the voice of a person speaking into the microphone to be automatically focused, and the volume of the rest of the sounds to be lowered as soon as the presenter starts speaking. The device also has one shared, balanced 5-pole Phoenix audio output for the built-in sound mixer.
Using factory, custom or transparent EDID emulation users can fix and lock EDID data on each input connector. Advanced EDID Management forces the required resolution from any video source and fixes the output format to conform to the system requirements.
The unit can be controlled via RS-232, Ethernet or USB ports, but it also offers RS-232, Serial and IR command injection capabilities allowing to send any control command directly from the LAN connection to end points.
The MMX8x4-HT400MC is compatible with both HDBaseTTM extenders and HDBaseTTM compliant displays.
The built-in Event Manager feature provides control via RS-232 and IR ports.
Advanced Control Pack Features:
- 100 available event slots in ’Plus’ extenders
- Support RS-232 protocol for communication and control of third party devices like VC codecs. This allows the Cisco Room Kit login on RS-232–USB connection.
- Support to receive CEC commands for control of displays and Lightware Event Manager to automate room actions.
- Support to send CEC commands on HDMI ports for control of other devices.
- Support true Infrared messages using HEX codes to control TVs, media players and other devices with IR emitters.
Remote Power Compatibility Table- Cisco VC room integration compatibility
- Advanced control feature pack for 3rd party video conference collaboration
- 1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
- Audio embedding and de-embedding
- Adjustable analog audio settings (volume, gain, balance)
- Frame Detector (analyze detailed video timings)
- Front to back cooling airflow
- 5-pole Phoenix balanced analog audio connectors
- Directly mountable in 19" rack
- Built-in universal power supply
- TPS link quality and cable length monitoring
- Input cable equalization up to 30m at 1080p60Hz (with 24 AWG high quality DVI/HDMI cable)
- HDCP enable/disable function on input
- HDBaseT compatible
- Vista Spyder and Barco Encore compatibility
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Quick and easy EDID editing and creation with Advanced EDID Editor software
- Advanced EDID Management
- Save and reload full crosspoint configurations as preset
- Intuitive control software for device configuration
- Device control via Ethernet (TCP/IP), RS-232 and USB
- Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps)
- Command injection on RS-232 and IR ports
- Fully non-blocking switching architecture
- Autoselect modes to automatically switch video and audio (first detect, last detect, priority)
- Built-in Event Manager control automation feature
- Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
- Pixel Accurate Reclocking
- No video compression
- Bi-directional RS-232 extension (pass-through)
- Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
- Firmware upgrade through Ethernet
- Front panel LCD menu for configuration and crosspoint control
- Built-in microphone pre-amplifier and sound mixer
- Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
- Extension distance up to 70 meters (with CAT7 S/FTP AWG23 cable, 1920x1080p60)
- Built-in video test pattern generator
- No signal latency, zero frame delay
MMX8x4-HT400MC is the corporate version of the similar MMX8x4-HT420M with fewer services and features. Please compare the differences of these matrix switchers with the help of the following comparison table:
| Features and Services | MMX8x4-HT420M | MMX8x4-HT400MC |
| 4K / UHD (30Hz RGB 4:4:4 60Hz YCbCr 4:2:0) and 3D capabilities | Yes | Yes |
| HDMI input ports | 4x | 4x |
| TPS (HDBaseT) input ports | 4x | 4x |
| HDMI output ports | 2x | 4x |
| TPS (HDBaseT) output ports | 2x | No |
| Up to 170 m transmission over TPS Long Reach Mode for Full HD signals | Yes | No |
| Balanced bi-directional analog audio ports | 2x | No |
| Balanced analog audio output for the built-in mixer | 1x | 1x |
| Special Audio Input Block for active microphone and line-in | Yes | Yes |
| Built-in DSP, sound mixer and ducking function for voiceover | Yes | Yes |
| Ethernet port for device control | 1x | 1x |
| Ethernet ports for external device control | 2x | No |
| Ethernet via TPS | Yes | No |
| Bi-directional RS-232 ports | 2x | 2x |
| Serial/IR ports for display control | 2x | 2x |
| IR ports for display control | 4x | 2x |
| Relay output ports | 4x | No |
| GPIO port | 6x GPIO + 5V + GND | No |
| PoE function to feed remote power to connected devices | Yes | No |
| Front panel LCD and jog dial button | Yes | Yes |
| Event Manager built-in control feature | Yes | Yes |
| Dimensions | 442 W (482 with ears) x 300 D x 87.8 H mm | |
Please visit the product page of MMX8x4-HT420M for more information.
List of reachable distances at various resolutions:
| Resolution | Pixel clock rate | Cable lengths (for ‘C’ Corporate models) | ||
| CAT5e AWG24 | CAT7 AWG26 | CAT7 AWG23 | ||
| 1024x768@60Hz | 65 MHz | 60 m | 80 m | 80 m |
| 1280x720p@60Hz | 73.8 MHz | 60 m | 80 m | 80 m |
| 1920x1080p@60Hz (24bpp) | 148.5 MHz | 60 m | 80 m | 80 m |
| 1920x1200@60Hz | 152.9 MHz | 60 m | 80 m | 80 m |
| 1600x1200@60Hz | 162 MHz | 60 m | 80 m | 80 m |
| 1920x1080@60Hz (36bpp) | 223 MHz | 60 m | 80 m | 80 m |
| 3840x2160@30Hz UHD | 297 MHz | 40 m | 40 m | 40 m |
| 4096x2160@30Hz 4K | 297 MHz | 40 m | 40 m | 40 m |
CAT7 SFTPAWG23 cable is always recommended
