25G-8HDMI2-A3K2-IB
4K HDMI Input Board with Analog Audio and KVM
25G-8HDMI2-A3-IB provides fully transparent HDMI 1.4 connectivity to the latest high-end digital sources including Audio Return Channel and 3D functions between the endpoints.
25G-8HDMI2-A3-IB provides fully transparent HDMI 1.4 connectivity to the latest high-end digital sources including Audio Return Channel and 3D functions between the endpoints. Supports resolution up to 4096x2160@30Hz in 4:4:4 mode or 3840x2160@60Hz in 4:2:0 mode. The new 300MHz board supports the latest 3D formats as well as HD multichannel audio.
25G-8HDMI2-A3-IB has eight HDMI connectors with an additional 5-pole analog Phoenix audio connector for each HDMI port. Each input has 30m input cable equalization and an individual EDID Management.
25G-8HDMI2-A3-IB handles embedded audio in the HDMI signal (with capabilities of routing to the 25G audio layers).
The A3 add-on has bi-directional and configurable Phoenix connectors. 2-channel LPCM audio embedded in the HDMI input or from the Return Audio Layer can be converted to an analog signal and switched to the Phoenix output. Moreover, the digitized analog audio through the analog input connector can be embedded to the HDMI signal or can be routed to the Forward Audio Layer.
The audio options of the HDMI input board are software configurable on a per-port basis. The board also provides connectivity options for computers with USB HID peripherals through its USB-B connectors on the K2 add-on. Each input port can handle two HID devices.
Supported Media Layers
- Video layer with embedded audio
- Forward audio layer
- Return audio layer
- Consumer Electronics Control Layer
- USB KVM Layer
- 1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
- Bidirectional balanced analog stereo audio ports with 5-pole Phoenix connector
- Optional digital or analog audio embedding and de-embedding add-ons
- Audio embedding and de-embedding
- Adjustable analog audio settings (volume, gain, balance)
- Optional digital or analog audio embedding and de-embedding add-ons
- Frame Detector (analyze detailed video timings)
- 5-pole Phoenix balanced analog audio connectors
- HDMI ARC (Audio Return Channel) support
- Input cable equalization up to 30m at 1080p60Hz (with 24 AWG high quality DVI/HDMI cable)
- HDCP enable/disable function on input
- Bidirectional balanced analog stereo audio ports with 5-pole Phoenix connector
- USB KVM (HID) extension
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Advanced EDID Management
- Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps)
- CEC support (pass-through)
- Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
- Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
- Pixel Accurate Reclocking
- HDCP 1.4 compliant
- Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
- Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
- Built-in video test pattern generator
- No signal latency, zero frame delay
Specifications | |
HDCP compliancy: | Yes |
Max Resolution: |
4K / UHD (30Hz RGB or YCrCb 4:4:4, 60Hz YCbCr 4:2:0), 1080p@60Hz, 720p/1080i@120Hz |
Supported audio formats: | HDMI audio according to the Audio switching matrix section |
3D signal compatibility: | Frame packing, side-by-side, top-bottom |
Input cable equalization: |
30 m for 1080p60Hz, 14 m for 4K@30Hz (tested with 22AWG cable) |
Power consumption: | N/A |
Calculated AC power: | 48 W (max.), 28.8 W (typ.9 |
Heat dissipation (BTU/h): | N/A |
Audio connectors: | 8 x 5-pole Phoenix type |
Video connectors: | 8 x HDMI |
USB connectors: | 8 x USB B |